Get accessories

Last change:
4 August 2016
Spooky2 Home Care Kit added
Spooky Cold Laser Wrist and Twin added
Spooky PEMF Coil for XM added

You can greatly extend and enhance the power of Spooky2 by adding any or all of the accessories below.

Whether you want to search for anomalous frequencies in the body, supercharge your remote transmission power, or simply add a set of professional quality handheld electrodes, Spooky
2 has you covered.

Spooky Pulse

SPEar AttachmentFinger

Finding frequencies in the body that that correspond to viruses, bacteria, and parasites is simplicity itself with this little fellow. Plug him in and attach his clip to your earlobe. Or, if you choose the fingerclip version, attach it to a finger. Click any red Channel button in Spooky2 to open its Control panel. Enter the range of frequencies you want to investigate in the Start and Finish Frequency fields. Then enter the Initial Step Size for the search, the number of decimal places of accuracy you want, the number of hits you wish to find, and hit Scan. Or simply choose the preset we’ve provided for biofeedback, then enter your own range and settings.

Now grab your electrodes, lie down, close your eyes, and relax completely. Spooky
2 will “ping” your body with a sweep through the frequency range you entered, noting any “hits” or echoes it receives. When it’s done, it returns to all the hits found and automatically sweeps around them until it finds the exact frequency that generates the strongest responses. These are then written to memory, and you can choose to save them to file in your own custom database when the process is complete.

You don’t have to use Spooky Hand Cylinders though – you can use Spooky TENS pads or a Spooky Remote to transmit them instead.

Depending on your range settings – and your own heart rate – the average session takes 10-90 minutes, and you then have your own personal custom frequency set to experiment with anomalies detected in your scan.

Spooky Pulse comes with all cables required.


Spooky Cold Laser Wrist/Twin

LLLT Wrist 1LLLT twin (2)
Left: Spooky Cold Laser Wrist. Right: Spooky Cold Laser Twin

Cold laser, also called Low Level Laser Therapy (LLLT), uses safe non-thermal light photons to accelerate the body’s natural healing processes. This light energy can penetrate right through all the layers of our skin with ease. It’s especially useful for pain, joint and neurological problems, wounds and burns, dental issues, lymph node swelling, tinnitus, and bone/tissue regeneration, plus many more applications.

While researching cancer cells in 1974, Prof. Fritz-Albert Popp made the astounding discovery that all cells store photons of light, particularly around DNA. He showed that cancer and other diseased cells have a significantly different level of photon emission to normal cells, and theorized that this stored internal light may be a major part of how cells communicate with each other in the body to maintain overall health. Subsequent Russian DNA research validated his findings. The therapeutic uses of cold laser are backed by many medical studies.

Cold laser therapy is normally applied for 30 minutes, but longer times are fine. Spooky Cold Laser Wrist is designed to be worn around the wrist, where it can easily treat the entire blood supply, the carpal tunnel, and the meridian complex, but it can also be used on other areas. Spooky Cold Laser Twin is used for pinpoint application to any area of the body, and can be used in the mouth, or inserted into ear canals and nostrils.

Either unit connects directly to Out 1 of a Spooky
2-5M generator, or to Out 1 of a Spooky Boost 3.0, and can be pulsed by frequencies.


Spooky PEMF Coil

Spooky Coil Gen

This is our PEMF (Pulsed ElectroMagnetic Field) coil. It comes as standard with Spooky Central, but this version can be connected directly to Out 1 of a Spooky2-5M generator using the BNC to 6.3 mm mono adaptor that comes with it. You can also connect it to Out 1 of a Spooky Boost 3.0, or to its High Power Contact output. Adding a BNC Female-to-Female connector enables connection to the BN or MN outputs.

If you already own a Spooky Central, you can connect its Spooky Coil to a generator with
this very inexpensive adaptor.

Use with a generator is very suitable for healing/frequency entrainment. By laying it on a flat surface and placing a glass of water on top of the coil, you can also imprint a frequency of your choice into the water. Or insert a vial in the central opening.


Spooky Remote v1.1

SR1_1BNedit2 SR1_1MNedit2
Left: Bio North. Right: Magnetic North

This is how scalar wave creation should be done. No Mobius coils – all that’s needed is a pair of dual-layer planar coils arranged as a “sandwich,” then boost the magnetic field more than 12,000 times by incorporating a super-powerful neodymium magnet. Enclose your specimen in paper masking tape, insert it into the sandwich as the “filling” so that the specimen sits beneath the circular magnet – and be prepared to be surprised at the raw scalar power.

Two versions are available. The Biomagnetic North model (top, with white padding) excels at fast healing, repair, and regeneration – and it also kills very effectively. The Magnetic North unit (bottom, with black padding) is very slightly quicker to kill pathogens, but it’s not suitable for long-term continuous or environmental use.

Spooky Remote takes DNA scalar wave transmission to the next level.

Both come fully assembled, complete with with a 500mm (19.5in) BNC cable.


Spooky Boost 3.0


This clever signal processor connects to both Outs of your Spooky2-5M frequency generator, providing six individually-purposed outputs.

Out 1 and Out 2 are pass-through connections. They provide the individual signals from the generator’s Outs unprocessed. You can use these to connect two sets of Spooky Hand Cylinders (see below), or one plus a set of footplates. It’s also possible to connect the original Spooky Boost cable to these to provide another two outputs. In this case, the amplitude will be shared. We don’t recommend doing this.

The Colloidal Silver output has additional components in its circuit, mixing and processing the generator’s summed outputs for optimum manufacture of very high quality colloidal silver. You can also use this output to connect a single set of Spooky Hand Cylinders for Contact Mode – this will provide an attenuated signal. If you prefer to maintain complete amplitude control, you can use the High Pwr Contact output.

The BN output is configured to drive a Spooky Remote v1.1 Bio North, while the MN one is used for the Magnetic North model.

Why would you want to use this?

Well, Spooky Boost 3.0 can
quadruple the generator’s power in Contact Mode.

In Remote Mode, it enables you to mix two waveforms/frequencies and transmit the result from one Spooky Remote. This allows you to run Programs that used to require two Remotes on just one instead – effectively doubling the power and effectiveness of your transmission.

For Plasma Mode users, the extra power that Spooky Boost 3.0 provides can allow direct driving of
some power amplifiers. A Spooky Central should be connected to Out 1 and Out 2 only/


Spooky Hand Cylinders


Electrodes that come with many Rife machines are made from industrial-grade copper or stainless steel tubing. Spooky Hand Cylinders go the extra mile – these electrodes are fabricated from the high quality surgical steel used in body implants. That way, the very small amount of ionic transfer through the skin that occurs with all electrodes is quite harmless and safe.

Well, they say God is in the details.

The Spooky Hand Cylinders kit comes with two electrodes. Simply insert the clips on the BNC-to-alligator clips cable that came with your generator into the socketed end-cap, plug in, and you’re ready to roll.

Please note that Spooky Hand Cylinders are more effective when used with the Spooky2–5M generators because of its much higher power output. The UDB1108S really requires the use of an external amplifier. And use caution with this older generator – it may be damaged if the electrodes touch each other for an extended period while it’s running. The Spooky2–5M is short circuit-proof.


Spooky Radionics

Spooky Radionics v2CD

We’re very proud to introduce the latest powerful addition to our Spooky2 family – Spooky Radionics v1.1. This beautiful and compact device was specially designed for us by Berkana Labs, an artisan British company with a history of building awesome – and elegant – radionics machines.

Powered by a Spooky
2-5M generator, Spooky Radionics can be used for treatment and diagnostics. It can narrowcast just like a Spooky Remote, using DNA on the Output plate and transmitting via scalar energy. But it’s capable of much more. You can run frequencies and augment them with radionics “rates” using the three dials. You can then add any healing/beneficial substance – or crystal – to the Input plate. Spooky Radionics will detect its energy field and mix it to the total Output signal.

However, you’re not limited to transmitting via DNA. You can place a dropper bottle with distilled water on the Output plate, then “imprint” it with frequencies and rates, PLUS whatever you put on the Input plate. You can also use this method to copy or clone any remedy you like. You don’t have to use ingestibles either – you can program a healing crystal instead and carry it on your person.

Diagnostics can be done by placing a DNA sample on the Input plate, then turning each dial while holding a pendulum or using the Output as a “stick plate.” Once you’ve found the rate for the problem, you can easily calculate the rate needed to reverse it, and either transmit it via DNA or create a remedy for it.

With Spooky Radionics, the possibilities are limited only by your imagination and inventiveness.

Coming in 2017 is our latest addition – the Spooky Radionics 12-dial unit. Plus a range of accessories that will add power, function, and value.


Spooky2 Kits

There are five different handy kits available to simplify your choices – three are shown below:

Left to right: the Spooky2 Starter’s Kit, the Spooky2 Essential Kit for Cancer, Lyme, and Morgellons, and the Spooky2 Advanced Kit for Cancer, Lyme, and Morgellons

Spooky2 Starter’s Kit: this comes with one Spooky2-5M frequency generator, both Spooky Remotes, and all the other accessories except for Spooky Radionics (plus more goodies not listed on this page). See it on the Spooky2-Mall website, or click the image.

Spooky2 Essential Kit for Cancer, Lyme, and Morgellons: this includes two generators, three Spooky Remotes, and all the other accessories except for Spooky Radionics (plus more goodies not listed on this page). See it here, or click the image.

Spooky2 Advanced Kit for Cancer, Lyme, and Morgellons: this includes four generators, five Spooky Remotes, and all the other accessories except for Spooky Radionics (plus more goodies not listed on this page). See it here, or click the image.

Spooky2 Home Care Kit: designed for home insect pest and mould remediation, this includes one generator, a Spooky Boost 3.0, and Spooky Remote v1.1 Bio North. It’s here.

Spooky2 Colloidal Silver Kit: this comes with a Spooky Boost 3.0 and two 300mm long 2.5mm diameter certified 99.99% pure silver rods. See it here.

Continue to Spooky2 Forum gateway...